Operation Method
1. Cut the balloon mouth: In order to better fit the inflated ball skin and the inner wall of the packaging machine, the wide-mouth bobo balloon must be cut short, the 18-inch latex ball does not need to be cut, and the 36-inch latex ball is recommended to be cut short.
2. Inflatable Ball: Use the balloon flaring device to inflate the ball mouth, put the ball on the packing machine, and turn the balloon out from the inside.
3. Snap the upper hemisphere into the lower hemisphere, align the edges, and lock the 2 spring clips evenly (remember not to lock all the spring clips at this time!),
4. After the inflation is completed, quickly lock the remaining spring clips, and insert the ball or plush toy after reaching the required size.
5. If the operation time is too long, the big ball may leak air, it can be inflated twice.
6. After filling the ball, take out the balloon and inflate it with an air pump.